STRONG-JACKING TOOL
The Strong-Jack is a solid stainless steel tool that
simplifies raising the car, whether at one corner only or completely off the
floor at all 4 corners. BMW provides 4 square rubber or plastic pads under the
rocker panel for your convenience when lifting the car with a floor jack.
However, since the head of the floor jack occupies the pad, there is no place to
position a standard, commercial jackstand once elevated. Many BMW's, including,
but not limited to , the e31 and e 36 models, have 4 receivers in the rocker
panel for insertion of the factory jack.
To use the Strong-Jack, insert the tool into the rocker panel receiver and raise
the car with your floor jack under the head of the Strong-Jack tool. This leaves
the jackstand pad available for placement of your jackstand. See picture below.
Price: one strong-jack $60.00 each
two
55.00 each
four
50.00 each
+ S&H&I
